SpecRacer Ford Penske Shock Testing Service Information
You can now test your shocks for a fraction of what it takes to rebuild them. The testing will show if the shocks need to be rebuilt or not and will include the dyno sheets. If they need to be rebuilt, AccelRaceTek can send the shocks to one of the approved shops listed below. Information on testing is as follows.
AccelRaceTek
Attn: Mr. Shock Dyno
14801 Golf Links Drive
Los Gatos, CA 95032
(669) 232-4844
Shock Test Cost = $40 per shock + return shipping (includes dyno sheets and recommendation)
Note: Send only the bare shocks - no springs
Typical Shock Dyno Scan for SpecRacer Shocks
SpecRacer Ford Penske Shock Rebuild Information
SCCA-E Approved Sources to Rebuild Shocks
Penske
Attn: Geoff Miller
150 Franklin St
Reading PA, 19602
(610)375-6180
www.penskeshocks.com
Minimum Rebuild Cost = $170 per shock
Rebuild form web address:
http://www.penskeshocks.com/assets/SCCA%20SRF%20svc%20sheet1.pdf
Performance Shock, Inc.
Sonoma Raceway
29139 Arnold Drive
Sonoma CA 95476
www.pshox.com
Email info@pshox.com
(707)938-5664
Minimum Rebuild Cost = $170 per shock
Rebuild form web address:
http://performanceshock.com/PSi_Service_Form.pdf
SRP Engineering
63 BIRCH HILL ROAD,
LOCUST VALLEY NY 11560
Phone: (516) 671 9715
Fax: (516) 671 1449
srpcontact@aol.com
www.srpengineering.com
Minimum Rebuild Cost = $175 per shock
No rebuild form online – call for info
Process
Select a vendor to rebuild your shocks
Prepare your shocks for shipping
1. Remove Springs.
2. Leave bump rubber, rod end, and spring perch on shock.
3. Fill out any forms
4. Package them up and ship them
Wait for about 3 weeks