August CSR Update

New Kevlar Sprung Hub Clutch Disc – The new SCCA-E Kevlar SRF3 Sprung Hub Clutch Discs are now available on a limited quantity.  There were a few issues with the first run but the next batch coming in soon should be ready for prime time.  The first 20 Kevlar Sprung Hub Clutch Discs had about 6-8 discs that were too thick and would not operate properly. SCCA-E adjusted the material thickness tolerances to ensure that the new production run of Kevlar discs will operate properly. These updated discs should be available in about 2 weeks.  AccelRaceTek has a limited stock available but if you are planning to change out your clutch please place an order ahead of time. 

New Brakes – The new Wilwood brakes are running on our cars and working great.  They are in production and are currently shipping.  A limited quantity of the new brakes is available, so put your order in ASAP for your new set.  It is strongly recommended to replace the master cylinders if you go to the new brakes. 

New Bead Seat – The new bead seat insert is now shipping.  AccelRaceTek has one seat in stock and will bring it to the next race if anyone is interested in taking a look at it.  This new seat will allow almost anyone to fit into a SpecRacer with comfort.

ECU Update - The newest PE ECU’s have an updated data chip. V50 or newer firmware must be used for the latest ECUs to log data. Older ECU’s will log data on the newer firmware. New ECU’s will not log data on the old Firmware V37. There is no performance change on new firmware.

Laguna SpecRacers – The Laguna SpecRacer Ford race weekend was a lot of fun with over 30 cars on grid.  Racer came from the north, south and mid-west.  Robert Sachs’ car was sporting a very cool new paint job, if you didn’t get a chance to see it, plan to check it out at the next race.

Grid @ Laguna Seca

Grid @ Laguna Seca

Robert’s Cool New Paint

Robert’s Cool New Paint